1. Capacitive coupling: Capacitive coupling refers to the transmission of signals or electromagnetic waves through the electric field between two dielectrics. When there is a capacitance between two circuits, the capacitance will transmit signals or electromagnetic waves from one circuit to another, resulting in interference.
2. Interference will reduce the detection sensitivity of the local discharge test. During the test, the interference level should be suppressed to the lowest level. Interference classThe types usually include: power supply interference, grounding system interference, electromagnetic radiation interference, discharge interference of various components of test equipment and various contact interference. These interferences and the way to enter the test loop. A. Power supply interference.
3. Active electronic interference is the use of a special interference transmitter to emit or forward some form of electromagnetic waves, which disrupts or destroys the work of the enemy's electronic equipment and systems. The transmission interference signal carrier frequency, power and modulation mode (interference style) are selected according to the type, operating frequency and technical system of the electronic equipment to be interfered with.
1. This question assesses the self-interference system. CDMA and TD-SCDMA are self-interference systems. GSM and WCDMA are interference-restricted systems, and WSN does not belong to mobile communication systems. Therefore, the option BCE is correct.
2. WCDMA is a way to divide the code into multiple addresses and network at the same frequency. The more users, the denser the base station and the more interference. There will be interference between users. So it's self-interference. It is a kind of 3G. GSM is a frequency division and time division system. In addition, the user will not interfere with the user.
3. The difference between the self-interference system and the interference restriction is whether users can be added.When the interference is limited, due to the interference of the neighboring area, the launch strategy of the base station and/or UE in this community is saturated, so that new users cannot be added. The self-interference system belongs to the self-start system, which does not affect the addition of users, and users can be added.
4. There are many sources of inter-network interference in mobile communication networks, including internal system interference and external system interference. System internal interference refers to the interference generated between the LTE current network cells. The causes include: cross-time slot interference, GPS out-of-step interference, interference caused by over-coverage and equipment failure, etc.
5. No service system and other phenomena. Generally speaking, when the mobile phone signal shield is working, it will emit a frequency to interfere with the downward signal of its base station. If the power of the shield is greater than that of the local base station signalThe power of the number, then the mobile phone will have no signal. If the power of the shield is less than the power of the local base station signal, the mobile phone will have a signal.
1. Man-made interference, according to its generation method, is divided into active interference and negative interference in radio communication confrontation. Positive interference is the transmission of an electromagnetic wave emitted or forwarded by the transmitter; negative interference is the use of interference that does not produce electromagnetic radiation to consciously change the propagation of electromagnetic waves.
2. In the mobile communication system, the intermodulation interference generated mainly includes: intermodulation caused by external effects, transmitter intermodulation, and receiver intermodulation.
3. There are many sources of inter-network interference in mobile communication networks, including internal system interference and external system interference.System internal interference refers to the interference generated between the LTE current network cells. The causes include: cross-time slot interference, GPS out-of-step interference, interference caused by over-coverage and equipment failure, etc.
UEFA Champions League live-APP, download it now, new users will receive a novice gift pack.
1. Capacitive coupling: Capacitive coupling refers to the transmission of signals or electromagnetic waves through the electric field between two dielectrics. When there is a capacitance between two circuits, the capacitance will transmit signals or electromagnetic waves from one circuit to another, resulting in interference.
2. Interference will reduce the detection sensitivity of the local discharge test. During the test, the interference level should be suppressed to the lowest level. Interference classThe types usually include: power supply interference, grounding system interference, electromagnetic radiation interference, discharge interference of various components of test equipment and various contact interference. These interferences and the way to enter the test loop. A. Power supply interference.
3. Active electronic interference is the use of a special interference transmitter to emit or forward some form of electromagnetic waves, which disrupts or destroys the work of the enemy's electronic equipment and systems. The transmission interference signal carrier frequency, power and modulation mode (interference style) are selected according to the type, operating frequency and technical system of the electronic equipment to be interfered with.
1. This question assesses the self-interference system. CDMA and TD-SCDMA are self-interference systems. GSM and WCDMA are interference-restricted systems, and WSN does not belong to mobile communication systems. Therefore, the option BCE is correct.
2. WCDMA is a way to divide the code into multiple addresses and network at the same frequency. The more users, the denser the base station and the more interference. There will be interference between users. So it's self-interference. It is a kind of 3G. GSM is a frequency division and time division system. In addition, the user will not interfere with the user.
3. The difference between the self-interference system and the interference restriction is whether users can be added.When the interference is limited, due to the interference of the neighboring area, the launch strategy of the base station and/or UE in this community is saturated, so that new users cannot be added. The self-interference system belongs to the self-start system, which does not affect the addition of users, and users can be added.
4. There are many sources of inter-network interference in mobile communication networks, including internal system interference and external system interference. System internal interference refers to the interference generated between the LTE current network cells. The causes include: cross-time slot interference, GPS out-of-step interference, interference caused by over-coverage and equipment failure, etc.
5. No service system and other phenomena. Generally speaking, when the mobile phone signal shield is working, it will emit a frequency to interfere with the downward signal of its base station. If the power of the shield is greater than that of the local base station signalThe power of the number, then the mobile phone will have no signal. If the power of the shield is less than the power of the local base station signal, the mobile phone will have a signal.
1. Man-made interference, according to its generation method, is divided into active interference and negative interference in radio communication confrontation. Positive interference is the transmission of an electromagnetic wave emitted or forwarded by the transmitter; negative interference is the use of interference that does not produce electromagnetic radiation to consciously change the propagation of electromagnetic waves.
2. In the mobile communication system, the intermodulation interference generated mainly includes: intermodulation caused by external effects, transmitter intermodulation, and receiver intermodulation.
3. There are many sources of inter-network interference in mobile communication networks, including internal system interference and external system interference.System internal interference refers to the interference generated between the LTE current network cells. The causes include: cross-time slot interference, GPS out-of-step interference, interference caused by over-coverage and equipment failure, etc.
382.64MB
Check911.84MB
Check417.62MB
Check415.74MB
Check332.13MB
Check921.79MB
Check212.25MB
Check951.22MB
Check818.78MB
Check846.88MB
Check168.57MB
Check438.55MB
Check772.69MB
Check771.39MB
Check425.16MB
Check143.32MB
Check369.48MB
Check455.59MB
Check757.11MB
Check312.13MB
Check918.49MB
Check168.16MB
Check693.58MB
Check689.62MB
Check712.42MB
Check439.51MB
Check968.36MB
Check581.79MB
Check872.31MB
Check586.13MB
Check432.87MB
Check668.98MB
Check775.66MB
Check348.18MB
Check329.96MB
Check239.25MB
CheckScan to install
UEFA Champions League live to discover more
Netizen comments More
1055 Casino redeem
2025-01-09 18:34 recommend
1314 Hearthstone Arena Tier List
2025-01-09 18:17 recommend
2778 Casino Plus app
2025-01-09 17:02 recommend
417 Bingo Plus stock
2025-01-09 16:48 recommend
2576 LR stock price Philippines
2025-01-09 16:44 recommend