Casino Plus app

List of catalogs of this article:

• 1,Casino Plus app How to start the car? The correct ignition steps of the car (starting the engine method)
• 2, How to open the hood of a car?
• 3, What are the starting methods of the engine?

How to start the car? The correct steps for starting the car (how to start the engine)

1. Heat the car before driving, start in place and wait for three to five minutes. It's cold in winter.When the car is not started, the oil will flow into the oil shell, and the oil temperature is low. After the vehicle is started, the oil cannot reach the parts that need oil at the first time. The speed of the oil pump will slow down. The ignition system of the car is an ignition engine for normal.

2. The correct way to ignite the car is: step on the clutch deeply, turn the ignition key to the ON position, wait for 5 to 8 seconds, and then turn the key to the start position to start the engine; once the engine starts smoothly, the ignition key should be released immediately to let it automatically return to the ON position.

3. Continue to turn the key to on (if the key can't be strewed, it is likely that the steering wheel is locked. While gently turning the steering wheel, just squee it), and then stop waiting for 6-10 seconds to let the oil pump relay absorb. Start the engine, and then observe whether the indicator light of the instrument is normal.

4. The correct way to start the engine is: when starting, turn the ignition key to the on position, wait for 58s, and then turn the key to the start position to start the engine.

How to open the hood of a car?

1. At the bottom left of the vehicle's central console, the clutch pedalAbove the plate, on the edge of the black plastic plate, there is a long strip of small wrench. Hold it by hand and gently pull it back. After clicking, you can go to the front to open the engine cover. The sales consultant who sold your car failed in business ability.

2. The hood switch is in the car and needs to be turned on manually. The position of the switch is around the foot pedal. There is a switch button on the left side of the pedal. We can press the switch to open the outer hood. Put the hydraulic cylinder of the hood into the groove of the hood to support it.

3. First, find the hood switch of the car and pull up the hood of the car as shown in the figure. When the hood snap of the car bounces open, put your hand into the gap of the hood and move the snap to the right.

4. The car hood is to press the engine cover unlock button in the car, and then open it. There will be a lock under the engine cover to open it.

5. How to open the hood? The car mainly finds the power switch of the hood. Generally, on the left panel of the driver's seat, it may be a power switch pulled by hand or foot. The owner can open the hood by pulling or stepping on the power switch with his hand.

What are the starting methods of the engine?

1. There are two types of car start-up methods, one is keyless one-click start; the other is key rotation start. The function of one-click start-up intelligent system is: automatic unlocking. Automatic lock. Automatically close the window. Automatic anti-theft. One-click start. Turn off the engine with one click. Lock automatically before driving.It is automatically unlocked when the car is parked and turned off.

2. Keys to start the engine. For driving, keys are the easiest way to start the engine. This is also the most commonly used method for many people in the process of driving. Use the key to start the engine directly, let the circuit start normally, and turn on the ignition device in the engine.

3. In fact, the correct way to start the engine is very simple. The automatic transmission only needs to step on the brake, put the gear into p or N, open the key door, and it's done. The manual gear needs to be checked whether the gear is hanging. If the car is geared, it is still dangerous. Of course, some of the current manual transmissions can only start with clutch, and there is no problem in shifting gears.

4. The common start-up methods of the engine include human start-up, electric starter start-up and auxiliary gasoline engine start-up.1) Manpower start is hand crank start or rope pull start.

5. The motor includes the necessary armature, commutator, magnetic pole, brush, bearing, shell and other components. The engine must rotate with the help of external forces before it can operate on its own power. The process in which the engine transitions from a stationary state to a self-operating state with the help of external force is called the start-up of the engine.