UEFA Europa League

List of the table of contents of this article:

• 1, What should I do if the computer can't enter the system normally?
• 2, The computer cannot enter the system-solution
• 3, What should I do if the computer can't enter the system normally?
• 4、 What should I do if the computer can't be turned on and can't enter the system?
• 5, ASUS computer can't enter the system after power-on
• 6, What if the computer can't enter the system

What should I do if the computer can't enter the system normally?

Unplug the storage device and restart. If there are CDs, USB flash drives and other storage devices on the optical drive and USB interface, unplug them and restart them. Check that if the hard disk and startup device still cannot enter the system, enter the motherboard UEFI (BIOS) settings, detect the following items in order and operate: see if the motherboard detects the hard disk correctly.

Unable to enter the system normally is generally caused by software or hardware failure. There are many and complex reasons. It may be system file damage, virus infection, too many background self-starting programs or multiple security software installations causing the system to die, or the graphics card or memory Current problem.

The general handling method is as follows: restart the computer: inIn the current state, press the host restart key to restart the computer, or press the power button for a long time to force shutdown and then restart. If there is no error prompt and the system operation can be entered normally, it means that the last abnormality was just an occasional program or system operation error, which is irrelevant.

Keep clicking the F8 key to enter the system operation menu, select "Last Correct Configuration", restart the computer to see if it can be solved.

Restart the computer. If you can enter the system normally, it means that the last time was just an occasional program or system running error, and it doesn't matter.

If you can't enter the system normally frequently, press F8 immediately after booting to see if you can enter the safe mode or configure the correct mode for the last time. If so, the registry will be automatically repaired and exited normally after entering, and you should be able to enter the normal mode after restarting.

The computer cannot enter the system-solution

Before entering the operating system, you should press the F8 button, then select the last correct configuration, and then press the Enter key. You can consider reinstalling the system. Before reinstalling the system, please make sure that you have available Windows installation media (such as DVD or USB flash drive) and all important data backups.

Reinstalling the system is the way that many people will choose when there is a problem with the computer system. If you want to reinstall a system by yourself, you must first have an optical drive and an installation CD-ROM.

Solution: After restarting the computer, press the keyboard shortcut F8, the advanced option interface appears, and select "Safe Mode" to enter.Then the drivers that cause the system to crash through antivirus and uninstall depend on what the computer did before the problem occurred.

What should I do if the computer can't enter the system normally?

1. Check the hardware device: When the computer is turned on, it needs to read the system files through the hardware device. If the hardware device fails, it may cause the computer to be unable to enter the system. First, check whether there are hardware equipment failures, such as hard disk, memory, graphics card, etc.

2. Method 1: Restart the computer. First, if your computer cannot enter the system, you can try to restart the computer, which can usually solve most of the problems. Press the power button and wait for the computer to turn off automatically. If your computer doesn't respond, you can press the power button for a long time to force the computer to be turned off.

3. If the computer cannot enter the system, you can try the following steps: Check whether the computer hardware is normal, such as whether the power supply, memory, hard disk, etc. are connected or damaged.

4. If the computer cannot enter the system, it may be caused by hardware failure or system problems. This article will introduce several common solutions to help users quickly troubleshoot. Unplug the storage device and restart. If there are CD-ROM, USB flash drive and other storage devices on the optical drive and USB interface, unplug it and restart it.

5. If the last correct configuration cannot solve the problem, you can try to put the computer into safe mode, anti-virus the computer, thoroughly check each disk symbol, and then restart the brain to solve the problem. Windows system restores the Windows system to restore the computer to the working state.

What should I do if I can't enter the system when the computer is turned on?

Check the hardware connection: make sure that all cables and cables are firmly connected. You can check the power cord, monitor cable, keyboard cable, etc. Restart the computer: Press and hold the power button for 5 seconds to force the computer to turn off, and then press the power button again to turn it on.

The reason why the computer cannot enter the system after power-on Startup order problem: In BIOS, we can set the startup order of the computer. If we place optical drives, USB flash drives and other devices before the hard disk, the computer will detect these devices in the order of startup, resulting in the inability to start the system normally.

Network problems If the computer cannot enter the system when it is turned on, it may be caused by network problems. You can directly connect to the broadband network cable test first. If it is a broadband problem, contact broadband customer service to solve it. If it is a problem with the router, you can try to disconnect the power of the router and plug it in, restore the factory settings, and you can use it from the new settings.

If this problem occurs, the power should be cut off first, and then you can restart it again. After holding down the F8 button,The unified meeting will give several options, and then select the correct configuration for the last time. Generally, the problem that the computer with not serious problems cannot enter the system can be solved.

It is a common problem that the computer cannot enter the system when it is turned on, but many people don't know how to solve it. This article will introduce several solutions to help you solve this problem. Click the F8 key to enter the system operation menu, select "Last Correct Configuration", restart the computer, and see if it can be solved.

The ASUS computer cannot enter the system after power-on

It is recommended to try system repair: First, enter the safe mode and remove the recently installed driver/software. 1 Boot to WinRE (WindOws Recovery Environment), can be understood as recovery mode.

Press the F8 key to enter the safe mode to restart, and then keep pressing the F8 key on the keyboard to enter the safe mode. Enter the safe mode and select to enter the safe mode. The interface should appear after entering the safe mode.

Dear ASUS users, hello! If you can't enter the BIOS by pressing the F2 key, it may be caused by a hardware problem. Try switching. After turning on the power, press Fn+F and Fn+F8 to switch.

Traditional interface Enter the BIOS setting page (you need to select and confirm by the arrow key and Enter key on the keyboard) to restore the BIOS setting. Enter [Save & EXit] Page 1, select [Restore Defaults]2 and select [Yes]3. Confirm whether the boot hard disk is correct.

What if the computer can't enter the system

1. If the computer can't enter the system, it may be caused by hardware or software problems. This article will introduce several common solutions to help users solve problems quickly. Unplug the storage device and restart. If there are CD-ROM, USB flash drive and other storage devices on the optical drive and USB interface, unplug it and restart it.

2. Inability to enter the system normally is generally caused by software or hardware failure. There are many and complex reasons. It may be system file damage, virus infection, orIt may be that there are too many self-starting programs in the background or multiple security software installations that cause the system to fake death, or it may be that there is a problem with the graphics card or memory.

3. If the last correct configuration in safe mode cannot solve the problem, you can try to put the computer into safe mode, anti-virus the computer, thoroughly check each disk symbol, and then restart the brain to solve the problem. Windows system restores the Windows system to restore the computer to the working state.